diff options
Diffstat (limited to 'hypr')
| -rw-r--r-- | hypr/hypridle.conf | 37 | ||||
| -rw-r--r-- | hypr/hyprland.conf | 117 | ||||
| -rw-r--r-- | hypr/hyprlock.conf | 10 |
3 files changed, 83 insertions, 81 deletions
diff --git a/hypr/hypridle.conf b/hypr/hypridle.conf index 9b6ea02..4d18296 100644 --- a/hypr/hypridle.conf +++ b/hypr/hypridle.conf @@ -1,13 +1,34 @@ general { - lock_cmd = hyprlock # dbus/sysd lock command (loginctl lock-session) - unlock_cmd = # same as above, but unlock - before_sleep_cmd = swaylock # command ran before sleep - after_sleep_cmd = # command ran after sleep - ignore_dbus_inhibit = false # whether to ignore dbus-sent idle-inhibit requests (used by e.g. firefox or steam) + lock_cmd = pidof hyprlock || hyprlock # avoid starting multiple hyprlock instances. + before_sleep_cmd = loginctl lock-session # lock before suspend. + after_sleep_cmd = hyprctl dispatch dpms on # to avoid having to press a key twice to turn on the display. } listener { - timeout = 600 # in seconds - on-timeout = loginctl lock-session # command to run when timeout has passed - on-resume = # command to run when activity is detected after timeout has fired. + timeout = 150 # 2.5min. + on-timeout = brightnessctl set 0 # set monitor backlight to minimum, avoid 0 on OLED monitor. + on-resume = brightnessctl -r # monitor backlight restore. +} + +# turn off keyboard backlight, comment out this section if you dont have a keyboard backlight. +listener { + timeout = 150 # 2.5min. + on-timeout = brightnessctl -sd led::kbd_backlight set 0 # turn off keyboard backlight. + on-resume = brightnessctl -rd led::kbd_backlight # turn on keyboard backlight. +} + +listener { + timeout = 300 # 5min + on-timeout = loginctl lock-session # lock screen when timeout has passed +} + +listener { + timeout = 330 # 5.5min + on-timeout = hyprctl dispatch dpms off # screen off when timeout has passed + on-resume = hyprctl dispatch dpms on # screen on when activity is detected after timeout has fired. +} + +listener { + timeout = 1800 # 30min + on-timeout = systemctl suspend # suspend pc } diff --git a/hypr/hyprland.conf b/hypr/hyprland.conf index c8ab688..9e09cdb 100644 --- a/hypr/hyprland.conf +++ b/hypr/hyprland.conf @@ -1,9 +1,6 @@ # See https://wiki.hyprland.org/Configuring/Monitors/ #{{{ Monitor config -monitor = eDP-1, 1920x1080@60, 0x0, 1 monitor = , preferred, auto, 1 -monitor = HDMI-A-1, 1920x1080@60, 0x0, 1 -monitor = DP-1, 1920x1080@60, 1920x0, 1 #}}} # See https://wiki.hyprland.org/Configuring/Keywords/ for more @@ -14,21 +11,23 @@ monitor = DP-1, 1920x1080@60, 1920x0, 1 exec-once = xdph exec-once = hyprpm reload -n exec-once = hyprpaper -exec-once = hypridle +#exec-once = hypridle exec-once = waybar exec-once = pypr exec-once = lxqt-policykit-agent exec-once = import-gsettings gtk-theme 'Flat-Remix-GTK-Green-Darkest-Solid' exec-once = import-gsettings icon-theme 'Mint-X-Grey' -exec-once = import-gsettings cursor-theme 'Breeze' +exec-once = import-gsettings cursor-theme 'BreezeX-Black' exec-once = xrdb -load "$XDG_CONFIG_HOME"/X11/xresources exec-once = com.github.wwmm.easyeffects -exec-once = mpd +exec-once = systemctl --user start dunst +exec-once = systemctl --user start hypridle +#exec-once = mpd #}}} #{{{ env # Environment variables set at launch -env = HYPRCURSOR_THEME,BreezeHypr +env = HYPRCURSOR_THEME,theme_BreezeX-Black env = HYPRCURSOR_SIZE,32 env = XCURSOR_THEME,BreezeX-Black env = XCURSOR_SIZE,32 @@ -39,8 +38,9 @@ env = XCURSOR_SIZE,32 # Debug {{{ debug { - enable_stdout_logs = true - disable_logs = false + enable_stdout_logs = false + disable_logs = true + full_cm_proto = true } # }}} @@ -65,7 +65,13 @@ input { follow_mouse = 1 mouse_refocus = false touchpad { - natural_scroll = no + disable_while_typing = true + natural_scroll = false + tap_button_map = "lrm" + clickfinger_behavior = true + tap-to-click = true + drag_lock = false + tap-and-drag = true } float_switch_override_focus = 0 sensitivity = 0 # -1.0 - 1.0, 0 means no modification. @@ -98,9 +104,9 @@ misc { disable_splash_rendering = true enable_swallow = true swallow_regex = ^(kitty)$ - swallow_exception_regex = ^(.*)(ueberzug)$ + swallow_exception_regex = ^(wev|.*ueberzug|n?vi?m? .*)$ vfr = true - vrr = 1 + vrr = 3 } #}}} @@ -108,10 +114,6 @@ misc { decoration { # See https://wiki.hyprland.org/Configuring/Variables/ for more rounding = 10 - drop_shadow = yes - shadow_range = 4 - shadow_render_power = 3 - col.shadow = rgba(1a1a1aee) #{{{ Blur options blur { enabled = true @@ -121,6 +123,14 @@ decoration { xray = true } #}}} + #{{{ Shadow options + shadow { + enabled = false + range = 4 + render_power = 3 + color = 0xee1a1a1a + } + #}}} } #}}} @@ -153,11 +163,13 @@ master { special_scale_factor = 0.55 mfact = 0.55 # See https://wiki.hyprland.org/Configuring/Master-Layout/ for more - new_status = inherit - new_on_top = true - no_gaps_when_only = false + new_status = slave + new_on_top = false + new_on_active = before + #no_gaps_when_only = false orientation = left inherit_fullscreen = true + drop_at_cursor = true } #}}} @@ -172,6 +184,7 @@ gestures { plugin { hyprsplit { num_workspaces = 9 + persistent_workspaces = true } } #}}} @@ -180,41 +193,8 @@ plugin { # Example windowrule v1 # windowrule = float, ^(kitty)$ # Example windowrule v2 -# windowrulev2 = float, class:^(kitty)$, title:^(kitty)$ +# windowrule = float, class:^(kitty)$, title:^(kitty)$ # See https://wiki.hyprland.org/Configuring/Window-Rules/ for more -windowrule = windowdance, ^(oneshot)$ -windowrule = windowdance, title:^(UNDERTALE)$ -windowrule = windowdance, title:^(Rhythm Doctor)$ -windowrule = fullscreen, ^(Xephyr)$ -windowrule = float, title:^(LibreWolf - Choose User Profile)$ -windowrule = float, ^(xdg-desktop-portal-gtk) -windowrule = float, title:^(UNDERTALE)$ -windowrule = float, ^(Tk)$ -windowrule = float, ^(lxqt-policykit-agent)$ -windowrulev2 = stayfocused, title:^()$, class:^(steam)$ -windowrulev2 = minsize 1 1, title:^()$, class:^(steam)$ -windowrulev2 = stayfocused, title:^(menu)$,class:^(yabridge-host.exe.so)$ -windowrulev2 = minsize 1 1, title:^(menu)$,class:^(yabridge-host.exe.so)$ -windowrulev2 = float, class:^(yabridge-host.exe.so)$, title:^(menu)$ -windowrulev2 = float, floating:0, title:^(menu*) -windowrulev2 = forceinput, title:^(menu*) -windowrulev2 = windowdance, title:^(menu*) -windowrule = workspace 2, title:^(REAPER .*initializing.*)$ -windowrulev2 = tile, class:^(REAPER)$, title:^(.*REAPER v[0-9.]* - Licensed for personal/small business use)$ -windowrule = tile, ^(WebApp-Qobuz[0-9]*)$ -windowrulev2 = float, title:^(menu)$ -windowrulev2 = move cursor -50% -50%, class:^(yabridge-host.exe.so)$, title:^(menu)$ -#windowrulev2 = nofocus, class:^(yabridge-host.exe.so)$, title:^(\s*)$ -#windowrulev2 = move cursor -50% -50%, class:^(REAPER)$, title:^(Snap/Grid Settings)$ -#windowrulev2 = move cursor -50% -50%, class:^(REAPER)$, title:^(Routing for track [0-9]*)$ -#windowrulev2 = move cursor -50% -50%, class:^(REAPER)$, title:^(Metronome and pre-roll settings)$ -#windowrulev2 = move cursor -50% -50%, class:^(yabridge-host.exe.so)$, title:^(menu)$ -#windowrulev2 = nofocus, class:^(yabridge-host.exe.so)$, title:^(\s*)$ -#windowrulev2 = move cursor -50% -50%, class:^(yabridge-host.exe.so)$, title:^(\s*)$ -#windowrulev2 = move cursor -50% -50%, class:^(REAPER)$, title:^(Snap/Grid Settings)$ -#windowrulev2 = move cursor -50% -50%, class:^(REAPER)$, title:^(Routing for track [0-9]*)$ -#windowrulev2 = float, floating:0, title:^(menu)$ -#windowrulev2 = forceinput, title:^(menu)$ #}}} #{{{ Mods @@ -326,8 +306,8 @@ submap = reset #}}} #{{{ Menu bindings -bind = $mainMod, R, exec, exec sh -c "$(tofi-drun -c ~/.config/tofi/themes/dmenu_vertical --prompt-text Run:)" -bind = $mainMod, D, exec, exec sh -c "$(tofi-run -c ~/.config/tofi/themes/dmenu_vertical --prompt-text Run:)" +bind = $mainMod, R, exec, sh -c "$(tofi-drun -c ~/.config/tofi/themes/dmenu_vertical --prompt-text Run:)" +bind = $mainMod, D, exec, sh -c "$(tofi-run -c ~/.config/tofi/themes/dmenu_vertical --prompt-text Run:)" bind = $mainMod $secdMod, Q, exec, qbc bind = $mainMod $secdMod, W, exec, lwc bind = $mainMod $secdMod, E, exec, mbc @@ -348,80 +328,81 @@ bind = $mainMod, Q, exec, loginctl lock-session bind = $mainMod $secdMod CONTROL, Q, exec, systemctl suspend bind = $mainMod SHIFT, G, exec, get-app-id bind = $mainMod Control, M, exec, volsv -m +bind = $mainMod, Comma, exec, acpi-notify.sh #bind = $mainMod CONTROL, R, exec, startx -- /usr/bin/Xephyr -screen 1920x1080 :1 #}}} #{{{ Scratchpads bind = $mainMod CONTROL, Z, exec, pypr toggle sphtop -$sphtop = ^(sphtop)$ +$sphtop = class:^(sphtop)$ windowrule = float,$sphtop windowrule = workspace special:sphtop silent,$sphtop windowrule = size 50% 50%,$sphtop windowrule = move 25% 25%,$sphtop bind = $mainMod CONTROL, X, exec, pypr toggle spterm -$spterm = ^(spterm)$ +$spterm = class:^(spterm)$ windowrule = float,$spterm -windowrule = workspace special:spterm silent,$dropterm +windowrule = workspace special:spterm silent,$spterm windowrule = size 50% 50%,$spterm windowrule = move 25% 25%,$spterm bind = $mainMod CONTROL, C, exec, pypr toggle sppmxr -$sppmxr = ^(sppmxr)$ +$sppmxr = class:^(sppmxr)$ windowrule = float,$sppmxr windowrule = workspace special:sppmxr silent,$sppmxr windowrule = size 50% 50%,$sppmxr windowrule = move 25% 25%,$sppmxr bind = $mainMod CONTROL, V, exec, pypr toggle spblue -$spblue = ^(spblue)$ +$spblue = class:^(spblue)$ windowrule = float,$spblue windowrule = workspace special:spblue silent,$spblue windowrule = size 50% 50%,$spblue windowrule = move 25% 25%,$spblue bind = $mainMod CONTROL, B, exec, pypr toggle spncmp -$spncmp = ^(spncmp)$ +$spncmp = class:^(spncmp)$ windowrule = float,$spncmp windowrule = workspace special:spncmp silent,$spncmp windowrule = size 50% 50%,$spncmp windowrule = move 25% 25%,$spncmp bind = $mainMod CONTROL, A, exec, pypr toggle spmutt -$spmutt = ^(spmutt)$ +$spmutt = class:^(spmutt)$ windowrule = float,$spmutt windowrule = workspace special:spmutt silent,$spmutt windowrule = size 50% 50%,$spmutt windowrule = move 25% 25%,$spmutt bind = $mainMod CONTROL, S, exec, pypr toggle spprof -$spprof = ^(spprof)$ +$spprof = class:^(spprof)$ windowrule = float,$spprof windowrule = workspace special:spprof silent,$spprof windowrule = size 50% 50%,$spprof windowrule = move 25% 25%,$spprof bind = $mainMod CONTROL, D, exec, pypr toggle spirss -$spirss = ^(spirss)$ +$spirss = class:^(spirss)$ windowrule = float,$spirss windowrule = workspace special:spirss silent,$spirss windowrule = size 50% 50%,$spirss windowrule = move 25% 25%,$spirss bind = $mainMod CONTROL, F, exec, pypr toggle sptodo -$sptodo = ^(sptodo)$ +$sptodo = class:^(sptodo)$ windowrule = float,$sptodo windowrule = workspace special:sptodo silent,$sptodo windowrule = size 50% 50%,$sptodo windowrule = move 25% 25%,$sptodo bind = $mainMod CONTROL, G, exec, pypr toggle sptrmc -$sptrmc = ^(sptrmc)$ +$sptrmc = class:^(sptrmc)$ windowrule = float,$sptrmc windowrule = workspace special:sptrmc silent,$sptrmc windowrule = size 50% 50%,$sptrmc windowrule = move 25% 25%,$sptrmc bind = $mainMod CONTROL, Q, exec, pypr toggle qpwgraph -$spqpwg = ^(org\.rncbc\.qpwgraph)$ +$spqpwg = class:^(org\.rncbc\.qpwgraph)$ windowrule = float,$spqpwg windowrule = workspace special:spqpwg silent,$spqpwg windowrule = size 50% 50%,$spqpwg windowrule = move 25% 25%,$spqpwg bind = $mainMod CONTROL, E, togglespecialworkspace, speasy -$speasy = ^(com\.github\.wwmm\.easyeffects)$ +$speasy = class:^(com\.github\.wwmm\.easyeffects)$ windowrule = float,$speasy windowrule = workspace special:speasy silent,$speasy windowrule = size 50% 50%,$speasy diff --git a/hypr/hyprlock.conf b/hypr/hyprlock.conf index 84d08ae..57f9fdd 100644 --- a/hypr/hyprlock.conf +++ b/hypr/hyprlock.conf @@ -1,10 +1,10 @@ general { - disable_loading_bar = false - hide_cursor = false + disable_loading_bar = true + hide_cursor = true grace = 0 - no_fade_in = false - no_fade_out = false - ignore_empty_input = false + no_fade_in = true + no_fade_out = true + ignore_empty_input = true } background { |