diff options
Diffstat (limited to 'mksh/mkshrc')
| -rw-r--r-- | mksh/mkshrc | 684 |
1 files changed, 684 insertions, 0 deletions
diff --git a/mksh/mkshrc b/mksh/mkshrc new file mode 100644 index 0000000..5b61ae3 --- /dev/null +++ b/mksh/mkshrc @@ -0,0 +1,684 @@ +# $Id$ +# $MirOS: src/bin/mksh/dot.mkshrc,v 1.128 2020/04/13 18:39:03 tg Exp $ +#- +# Copyright (c) 2002, 2003, 2004, 2006, 2007, 2008, 2009, 2010, +# 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2019, +# 2020 +# mirabilos <m@mirbsd.org> +# +# Provided that these terms and disclaimer and all copyright notices +# are retained or reproduced in an accompanying document, permission +# is granted to deal in this work without restriction, including un- +# limited rights to use, publicly perform, distribute, sell, modify, +# merge, give away, or sublicence. +# +# This work is provided "AS IS" and WITHOUT WARRANTY of any kind, to +# the utmost extent permitted by applicable law, neither express nor +# implied; without malicious intent or gross negligence. In no event +# may a licensor, author or contributor be held liable for indirect, +# direct, other damage, loss, or other issues arising in any way out +# of dealing in the work, even if advised of the possibility of such +# damage or existence of a defect, except proven that it results out +# of said person's immediate fault when using the work as intended. +#- +# ${ENV:-~/.mkshrc}: mksh initialisation file for interactive shells + +# catch non-mksh, non-lksh, trying to run this file +case ${KSH_VERSION:-} in +*LEGACY\ KSH*|*MIRBSD\ KSH*) ;; +*) \return 0 ;; +esac + +# give MidnightBSD's laffer1 a bit of csh feeling +function setenv { + if (( $# )); then + \\builtin eval '\\builtin export "$1"="${2:-}"' + else + \\builtin typeset -x + fi +} + +# pager (not control character safe) +smores() ( + \\builtin set +m + \\builtin cat "$@" |& + \\builtin trap "rv=\$?; \\\\builtin kill $! >/dev/null 2>&1; \\\\builtin exit \$rv" EXIT + while IFS= \\builtin read -pr line; do + llen=${%line} + (( llen == -1 )) && llen=${#line} + (( llen = llen ? (llen + COLUMNS - 1) / COLUMNS : 1 )) + if (( (curlin += llen) >= LINES )); then + \\builtin print -nr -- $'\e[7m--more--\e[0m' + \\builtin read -u1 || \\builtin exit $? + [[ $REPLY = [Qq]* ]] && \\builtin exit 0 + curlin=$llen + fi + \\builtin print -r -- "$line" + done +) + +# customise your favourite editor here; the first one found is used +for EDITOR in "${EDITOR:-}" jupp jstar mcedit ed vi; do + EDITOR=$(\\builtin whence -p "$EDITOR") || EDITOR= + [[ -n $EDITOR && -x $EDITOR ]] && break + EDITOR=nvim +done + +\\builtin alias ls=ls l='ls -F' la='l -a' ll='l -l' lo='l -alo' +\: "${EDITOR:=/bin/ed}${TERM:=vt100}${USER:=$(\\builtin ulimit -c 0; id -un \ + 2>/dev/null)}${HOSTNAME:=$(\\builtin ulimit -c 0; hostname 2>/dev/null)}" +[[ $HOSTNAME = ?(?(ip6-)localhost?(6)) ]] && HOSTNAME=nil; \\builtin unalias ls +\\builtin export EDITOR HOSTNAME TERM USER="${USER:-?}" + +# minimal support for lksh users +if [[ $KSH_VERSION = *LEGACY\ KSH* ]]; then + PS1='$USER@${HOSTNAME%%.*}:$PWD>' + \\builtin return 0 +else + PS1='$(print -n "\E[1;32m[`logname`@`hostname`]:\E[1;37m";if [ "${PWD#$HOME}" = "$PWD" ]; then print -n "$PWD"; else print -n "~${PWD#$HOME}"; fi; print "\E[1;32m$\E[0m ")' +fi + +# mksh-specific from here +\: "${MKSH:=$(\\builtin whence -p mksh)}${MKSH:=/bin/mksh}" +\\builtin export MKSH + +# prompts +#PS4='[$EPOCHREALTIME] '; PS1='#'; (( USER_ID )) && PS1='$'; PS1=$'\001\r''${| +# \\builtin typeset e=$? +# +# (( e )) && REPLY+="$e|" +# REPLY+=${USER}@${HOSTNAME%%.*}: +# +# \\builtin typeset d=${PWD:-?}/ p=~; [[ $p = ?(*/) ]] || d=${d/#$p\//\~/} +# d=${d%/}; \\builtin typeset m=${%d} n p=...; (( m > 0 )) || m=${#d} +# (( m > (n = (COLUMNS/3 < 7 ? 7 : COLUMNS/3)) )) && d=${d:(-n)} || p= +# REPLY+=$p$d +# +# \\builtin return $e +#} '"$PS1 " + +# utilities +\\builtin alias doch='sudo mksh -c "$(\\builtin fc -ln -1)"' +\\builtin command -v rot13 >/dev/null || \\builtin alias rot13='tr \ + abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ \ + nopqrstuvwxyzabcdefghijklmNOPQRSTUVWXYZABCDEFGHIJKLM' +if \\builtin command -v hd >/dev/null; then + \: +elif \\builtin command -v hexdump >/dev/null; then + function hd { + hexdump -e '"%08.8_ax " 8/1 "%02X " " - " 8/1 "%02X "' \ + -e '" |" "%_p"' -e '"|\n"' "$@" + } +else + function hd { + \\builtin cat "$@" | hd_mksh + } +fi + +# NUL-safe and EBCDIC-safe hexdump (from stdin) +function hd_mksh { + \\builtin typeset -Uui16 -Z11 pos=0 + \\builtin typeset -Uui16 -Z5 hv=2147483647 + \\builtin typeset dasc dn line i + \\builtin set +U + + while \\builtin read -arn 512 line; do + \\builtin typeset -i1 'line[*]' + i=0 + while (( i < ${#line[*]} )); do + dn= + (( (hv = line[i++]) != 0 )) && dn=${line[i-1]#1#} + if (( (pos & 15) == 0 )); then + (( pos )) && \ + \\builtin print -r -- "$dasc|" + \\builtin print -nr "${pos#16#} " + dasc=' |' + fi + \\builtin print -nr "${hv#16#} " + if [[ $dn = [[:print:]] ]]; then + dasc+=$dn + else + dasc+=. + fi + (( (pos++ & 15) == 7 )) && \ + \\builtin print -nr -- '- ' + done + done + while (( pos & 15 )); do + \\builtin print -nr ' ' + (( (pos++ & 15) == 7 )) && \ + \\builtin print -nr -- '- ' + done + (( hv == 2147483647 )) || \\builtin print -r -- "$dasc|" +} + +function which { + \\builtin typeset p x c + \\builtin typeset -i a=0 rv=2 e + \\builtin set +e + \\builtin set -o noglob + + while \\builtin getopts "a" x; do + case $x { + (a) a=1 ;; + (+a) a=0 ;; + (*) \\builtin print -ru2 'Usage: which [-a] name [...]' + \\builtin return 255 ;; + } + done + \\builtin shift $((OPTIND - 1)) + + # vvvvvvvvvvvvvvvvvvvv should be def_path + p=${PATH-/usr/bin$PATHSEP/bin} + # ^ no colon! + + # trailing PATHSEP vs field splitting + [[ $p = *"$PATHSEP" ]] && p+=. + + IFS=$PATHSEP + \\builtin set -A p -- ${p:-.} + IFS=$' \t\n' + + for x in "$@"; do + if (( !a )) || [[ $x = */* ]]; then + \\builtin whence -p -- "$x" + e=$? + else + e=1 + for c in "${p[@]}"; do + PATH=${c:-.} \\builtin whence -p -- "$x" && e=0 + done + fi + (( rv = (e == 0) ? (rv & ~2) : (rv == 2 ? 2 : 1) )) + done + \\builtin return $rv +} + +# Berkeley C shell compatible dirs, popd, and pushd functions +# Z shell compatible chpwd() hook, used to update DIRSTACK[0] +DIRSTACKBASE=$(\\builtin realpath ~/. 2>/dev/null || \ + \\builtin print -nr -- "${HOME:-/}") +\\builtin set -A DIRSTACK +function chpwd { + DIRSTACK[0]=$(\\builtin realpath . 2>/dev/null || \ + \\builtin print -nr -- "$PWD") + [[ $DIRSTACKBASE = ?(*/) ]] || \ + DIRSTACK[0]=${DIRSTACK[0]/#$DIRSTACKBASE/\~} + \: +} +\chpwd . +cd() { + \\builtin cd "$@" || \\builtin return $? + \chpwd "$@" +} +function cd_csh { + \\builtin typeset d t=${1/#\~/$DIRSTACKBASE} + + if ! d=$(\\builtin cd "$t" 2>&1); then + \\builtin print -ru2 "${1}: ${d##*cd: $t: }." + \\builtin return 1 + fi + \cd "$t" +} +function dirs { + \\builtin typeset d dwidth + \\builtin typeset -i fl=0 fv=0 fn=0 cpos=0 + + while \\builtin getopts ":lvn" d; do + case $d { + (l) fl=1 ;; + (v) fv=1 ;; + (n) fn=1 ;; + (*) \\builtin print -ru2 'Usage: dirs [-lvn].' + \\builtin return 1 ;; + } + done + \\builtin shift $((OPTIND - 1)) + if (( $# > 0 )); then + \\builtin print -ru2 'Usage: dirs [-lvn].' + \\builtin return 1 + fi + if (( fv )); then + fv=0 + while (( fv < ${#DIRSTACK[*]} )); do + d=${DIRSTACK[fv]} + (( fl )) && d=${d/#\~/$DIRSTACKBASE} + \\builtin print -r -- "$fv $d" + (( ++fv )) + done + else + fv=0 + while (( fv < ${#DIRSTACK[*]} )); do + d=${DIRSTACK[fv]} + (( fl )) && d=${d/#\~/$DIRSTACKBASE} + (( dwidth = (${%d} > 0 ? ${%d} : ${#d}) )) + if (( fn && (cpos += dwidth + 1) >= 79 && \ + dwidth < 80 )); then + \\builtin print + (( cpos = dwidth + 1 )) + fi + \\builtin print -nr -- "$d " + (( ++fv )) + done + \\builtin print + fi + \\builtin return 0 +} +function popd { + \\builtin typeset d fa + \\builtin typeset -i n=1 + + while \\builtin getopts ":0123456789lvn" d; do + case $d { + (l|v|n) fa+=" -$d" ;; + (+*) n=2 + \\builtin break ;; + (*) \\builtin print -ru2 'Usage: popd [-lvn] [+<n>].' + \\builtin return 1 ;; + } + done + \\builtin shift $((OPTIND - n)) + n=0 + if (( $# > 1 )); then + \\builtin print -ru2 popd: Too many arguments. + \\builtin return 1 + elif [[ $1 = ++([0-9]) && $1 != +0 ]]; then + if (( (n = ${1#+}) >= ${#DIRSTACK[*]} )); then + \\builtin print -ru2 popd: Directory stack not that deep. + \\builtin return 1 + fi + elif [[ -n $1 ]]; then + \\builtin print -ru2 popd: Bad directory. + \\builtin return 1 + fi + if (( ${#DIRSTACK[*]} < 2 )); then + \\builtin print -ru2 popd: Directory stack empty. + \\builtin return 1 + fi + \\builtin unset DIRSTACK[n] + \\builtin set -A DIRSTACK -- "${DIRSTACK[@]}" + \cd_csh "${DIRSTACK[0]}" || \\builtin return 1 + \dirs $fa +} +function pushd { + \\builtin typeset d fa + \\builtin typeset -i n=1 + + while \\builtin getopts ":0123456789lvn" d; do + case $d { + (l|v|n) fa+=" -$d" ;; + (+*) n=2 + \\builtin break ;; + (*) \\builtin print -ru2 'Usage: pushd [-lvn] [<dir>|+<n>].' + \\builtin return 1 ;; + } + done + \\builtin shift $((OPTIND - n)) + if (( $# == 0 )); then + if (( ${#DIRSTACK[*]} < 2 )); then + \\builtin print -ru2 pushd: No other directory. + \\builtin return 1 + fi + d=${DIRSTACK[1]} + DIRSTACK[1]=${DIRSTACK[0]} + \cd_csh "$d" || \\builtin return 1 + elif (( $# > 1 )); then + \\builtin print -ru2 pushd: Too many arguments. + \\builtin return 1 + elif [[ $1 = ++([0-9]) && $1 != +0 ]]; then + if (( (n = ${1#+}) >= ${#DIRSTACK[*]} )); then + \\builtin print -ru2 pushd: Directory stack not that deep. + \\builtin return 1 + fi + while (( n-- )); do + d=${DIRSTACK[0]} + \\builtin unset DIRSTACK[0] + \\builtin set -A DIRSTACK -- "${DIRSTACK[@]}" "$d" + done + \cd_csh "${DIRSTACK[0]}" || \\builtin return 1 + else + \\builtin set -A DIRSTACK -- placeholder "${DIRSTACK[@]}" + \cd_csh "$1" || \\builtin return 1 + fi + \dirs $fa +} + +# base64 encoder and decoder, RFC compliant, NUL safe, not EBCDIC safe +function Lb64decode { + \\builtin set +U + \\builtin typeset c s="$*" t + [[ -n $s ]] || { s=$(\\builtin cat; \\builtin print x); s=${s%x}; } + \\builtin typeset -i i=0 j=0 n=${#s} p=0 v x + \\builtin typeset -i16 o + + while (( i < n )); do + c=${s:(i++):1} + case $c { + (=) \\builtin break ;; + ([A-Z]) (( v = 1#$c - 65 )) ;; + ([a-z]) (( v = 1#$c - 71 )) ;; + ([0-9]) (( v = 1#$c + 4 )) ;; + (+) v=62 ;; + (/) v=63 ;; + (*) \\builtin continue ;; + } + (( x = (x << 6) | v )) + case $((p++)) { + (0) \\builtin continue ;; + (1) (( o = (x >> 4) & 255 )) ;; + (2) (( o = (x >> 2) & 255 )) ;; + (3) (( o = x & 255 )) + p=0 + ;; + } + t+=\\x${o#16#} + (( ++j & 4095 )) && \\builtin continue + \\builtin print -n $t + t= + done + \\builtin print -n $t +} +function Lb64encode { + \\builtin set +U + \\builtin typeset c s t table + \\builtin set -A table -- A B C D E F G H I J K L M N O P Q R S T U V W X Y Z \ + a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9 + / + if (( $# )); then + \\builtin read -raN-1 s <<<"$*" + \\builtin unset s[${#s[*]}-1] + else + \\builtin read -raN-1 s + fi + \\builtin typeset -i i=0 n=${#s[*]} v + + while (( i < n )); do + (( v = s[i++] << 16 )) + (( v |= s[i++] << 8 )) + (( v |= s[i++] )) + t+=${table[v >> 18]}${table[v >> 12 & 63]} + c=${table[v >> 6 & 63]} + if (( i <= n )); then + t+=$c${table[v & 63]} + elif (( i == n + 1 )); then + t+=$c= + else + t+=== + fi + if (( ${#t} == 76 || i >= n )); then + \\builtin print -r $t + t= + fi + done +} + +# Better Avalanche for the Jenkins Hash +\\builtin typeset -Z11 -Uui16 Lbafh_v +function Lbafh_init { + Lbafh_v=0 +} +function Lbafh_add { + \\builtin set +U + \\builtin typeset s + if (( $# )); then + \\builtin read -raN-1 s <<<"$*" + \\builtin unset s[${#s[*]}-1] + else + \\builtin read -raN-1 s + fi + \\builtin typeset -i i=0 n=${#s[*]} + + while (( i < n )); do + ((# Lbafh_v = (Lbafh_v + s[i++] + 1) * 1025 )) + ((# Lbafh_v ^= Lbafh_v >> 6 )) + done +} +function Lbafh_finish { + \\builtin typeset -Ui t + + ((# t = (((Lbafh_v >> 7) & 0x01010101) * 0x1B) ^ \ + ((Lbafh_v << 1) & 0xFEFEFEFE) )) + ((# Lbafh_v = t ^ (t ^> 8) ^ (Lbafh_v ^> 8) ^ \ + (Lbafh_v ^> 16) ^ (Lbafh_v ^> 24) )) + \: +} + +# strip comments (and leading/trailing whitespace if IFS is set) from +# any file(s) given as argument, or stdin if none, and spew to stdout +function Lstripcom { + \\builtin set -o noglob + \\builtin cat "$@" | while \\builtin read _line; do + _line=${_line%%#*} + [[ -n $_line ]] && \\builtin print -r -- $_line + done +} + +# toggle built-in aliases and utilities, and aliases and functions from mkshrc +function enable { + \\builtin typeset doprnt=0 mode=1 x y z rv=0 + \\builtin typeset b_alias i_alias i_func nalias=0 nfunc=0 i_all + \\builtin set -A b_alias + \\builtin set -A i_alias + \\builtin set -A i_func + + # accumulate mksh built-in aliases, in ASCIIbetical order + i_alias[nalias]=autoload; b_alias[nalias++]='\\builtin typeset -fu' + i_alias[nalias]=functions; b_alias[nalias++]='\\builtin typeset -f' + i_alias[nalias]=hash; b_alias[nalias++]='\\builtin alias -t' + i_alias[nalias]=history; b_alias[nalias++]='\\builtin fc -l' + i_alias[nalias]=integer; b_alias[nalias++]='\\builtin typeset -i' + i_alias[nalias]=local; b_alias[nalias++]='\\builtin typeset' + i_alias[nalias]=login; b_alias[nalias++]='\\builtin exec login' + i_alias[nalias]=nameref; b_alias[nalias++]='\\builtin typeset -n' + i_alias[nalias]=nohup; b_alias[nalias++]='nohup ' + i_alias[nalias]=r; b_alias[nalias++]='\\builtin fc -e -' + i_alias[nalias]=type; b_alias[nalias++]='\\builtin whence -v' + + # accumulate mksh built-in utilities, in definition order, even ifndef + i_func[nfunc++]=. + i_func[nfunc++]=: + i_func[nfunc++]='[' + i_func[nfunc++]=alias + i_func[nfunc++]=break + # \\builtin cannot, by design, be overridden + i_func[nfunc++]=builtin + i_func[nfunc++]=cat + i_func[nfunc++]=cd + i_func[nfunc++]=chdir + i_func[nfunc++]=command + i_func[nfunc++]=continue + i_func[nfunc++]=echo + i_func[nfunc++]=eval + i_func[nfunc++]=exec + i_func[nfunc++]=exit + i_func[nfunc++]=export + i_func[nfunc++]=false + i_func[nfunc++]=fc + i_func[nfunc++]=getopts + i_func[nfunc++]=jobs + i_func[nfunc++]=kill + i_func[nfunc++]=let + i_func[nfunc++]=print + i_func[nfunc++]=pwd + i_func[nfunc++]=read + i_func[nfunc++]=readonly + i_func[nfunc++]=realpath + i_func[nfunc++]=rename + i_func[nfunc++]=return + i_func[nfunc++]=set + i_func[nfunc++]=shift + i_func[nfunc++]=source + i_func[nfunc++]=suspend + i_func[nfunc++]=test + i_func[nfunc++]=times + i_func[nfunc++]=trap + i_func[nfunc++]=true + i_func[nfunc++]=typeset + i_func[nfunc++]=ulimit + i_func[nfunc++]=umask + i_func[nfunc++]=unalias + i_func[nfunc++]=unset + i_func[nfunc++]=wait + i_func[nfunc++]=whence + i_func[nfunc++]=bg + i_func[nfunc++]=fg + i_func[nfunc++]=bind + i_func[nfunc++]=mknod + i_func[nfunc++]=printf + i_func[nfunc++]=sleep + i_func[nfunc++]=domainname + i_func[nfunc++]=extproc + + # accumulate aliases from dot.mkshrc, in definition order + i_alias[nalias]=l; b_alias[nalias++]='ls -F' + i_alias[nalias]=la; b_alias[nalias++]='l -a' + i_alias[nalias]=ll; b_alias[nalias++]='l -l' + i_alias[nalias]=lo; b_alias[nalias++]='l -alo' + i_alias[nalias]=doch; b_alias[nalias++]='sudo mksh -c "$(\\builtin fc -ln -1)"' + i_alias[nalias]=rot13; b_alias[nalias++]='tr abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ nopqrstuvwxyzabcdefghijklmNOPQRSTUVWXYZABCDEFGHIJKLM' + i_alias[nalias]=cls; b_alias[nalias++]='\\builtin print -n \\ec' + + # accumulate functions from dot.mkshrc, in definition order + i_func[nfunc++]=setenv + i_func[nfunc++]=smores + i_func[nfunc++]=hd + i_func[nfunc++]=hd_mksh + i_func[nfunc++]=which + i_func[nfunc++]=chpwd + i_func[nfunc++]=cd + i_func[nfunc++]=cd_csh + i_func[nfunc++]=dirs + i_func[nfunc++]=popd + i_func[nfunc++]=pushd + i_func[nfunc++]=Lb64decode + i_func[nfunc++]=Lb64encode + i_func[nfunc++]=Lbafh_init + i_func[nfunc++]=Lbafh_add + i_func[nfunc++]=Lbafh_finish + i_func[nfunc++]=Lstripcom + i_func[nfunc++]=enable + + # collect all identifiers, sorted ASCIIbetically + \\builtin set -sA i_all -- "${i_alias[@]}" "${i_func[@]}" + + # handle options, we don't do dynamic loading + while \\builtin getopts "adf:nps" x; do + case $x { + (a) + mode=-1 + ;; + (d) + # deliberately causing an error, like bash-static + ;| + (f) + \\builtin print -ru2 enable: dynamic loading not available + \\builtin return 2 + ;; + (n) + mode=0 + ;; + (p) + doprnt=1 + ;; + (s) + \\builtin set -sA i_all -- . : break continue eval \ + exec exit export readonly return set shift times \ + trap unset + ;; + (*) + \\builtin print -ru2 enable: usage: \ + "enable [-adnps] [-f filename] [name ...]" + return 2 + ;; + } + done + \\builtin shift $((OPTIND - 1)) + + # display builtins enabled/disabled/all/special? + if (( doprnt || ($# == 0) )); then + for x in "${i_all[@]}"; do + y=$(\\builtin alias "$x") || y= + [[ $y = "$x='\\\\builtin whence -p $x >/dev/null || (\\\\builtin print -r mksh: $x: not found; \\\\builtin exit 127) && \$(\\\\builtin whence -p $x)'" ]]; z=$? + case $mode:$z { + (-1:0|0:0) + \\builtin print -r -- "enable -n $x" + ;; + (-1:1|1:1) + \\builtin print -r -- "enable $x" + ;; + } + done + \\builtin return 0 + fi + + for x in "$@"; do + z=0 + for y in "${i_alias[@]}" "${i_func[@]}"; do + [[ $x = "$y" ]] || \\builtin continue + z=1 + \\builtin break + done + if (( !z )); then + \\builtin print -ru2 enable: "$x": not a shell builtin + rv=1 + \\builtin continue + fi + if (( !mode )); then + # disable this + \\builtin alias "$x=\\\\builtin whence -p $x >/dev/null || (\\\\builtin print -r mksh: $x: not found; \\\\builtin exit 127) && \$(\\\\builtin whence -p $x)" + else + # find out if this is an alias or not, first + z=0 + y=-1 + while (( ++y < nalias )); do + [[ $x = "${i_alias[y]}" ]] || \\builtin continue + z=1 + \\builtin break + done + if (( z )); then + # re-enable the original alias body + \\builtin alias "$x=${b_alias[y]}" + else + # re-enable the original utility/function + \\builtin unalias "$x" + fi + fi + done + \\builtin return $rv +} + +\: place customisations below this line + +# some defaults / samples which you are supposed to adjust to your +# liking; by default we add ~/.etc/bin and ~/bin (whichever exist) +# to $PATH, set $SHELL to mksh, set some defaults for man and less +# and show a few more possible things for users to begin moving in + +for p in ~/.etc/bin ~/bin; do + [[ -d $p/. ]] || \\builtin continue + [[ $PATHSEP$PATH$PATHSEP = *"$PATHSEP$p$PATHSEP"* ]] || \ + PATH=$p$PATHSEP$PATH +done + +\\builtin export SHELL=$MKSH MANWIDTH=80 LESSHISTFILE=- +\\builtin alias cls='\\builtin print -n \\ec' + +#\\builtin unset LC_ADDRESS LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ +# LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ +# LC_TELEPHONE LC_TIME LANGUAGE LANG LC_ALL +#p=en_GB.UTF-8 +#\\builtin export LANG=C LC_CTYPE=$p LC_MEASUREMENT=$p LC_MESSAGES=$p LC_PAPER=$p +#\\builtin export LANG=C.UTF-8 LC_CTYPE=C.UTF-8 +#\\builtin export LC_ALL=C.UTF-8 +#\\builtin set -U +#[[ ${LC_ALL:-${LC_CTYPE:-${LANG:-}}} = *[Uu][Tt][Ff]?(-)8* ]] || \\builtin set +U + +\\builtin unset p + +set -o vi + +[ -r $MKSHDIR/mkshfunc ] && source $MKSHDIR/mkshfunc +[ -r $MKSHDIR/mkshalias ] && source $MKSHDIR/mkshalias + +HISTFILE="$MKSHDIR"/history + +\: place customisations above this line |