Initial Commit

3 files changed, 1087 insertions, 0 deletions

diff --git a/ncmpcpp/bindings b/ncmpcpp/bindings
new file mode 100644
index 0000000..9b8f4da
--- /dev/null
+++ b/ncmpcpp/bindings
@@ -0,0 +1,543 @@
+##############################################################
+## This is the example bindings file. Copy it to            ##
+## ~/.ncmpcpp/bindings or $XDG_CONFIG_HOME/ncmpcpp/bindings ##
+## and set up your preferences                              ##
+##############################################################
+##
+##### General rules #####
+##
+## 1) Because each action has runtime checks whether it's
+##    ok to run it, a few actions can be bound to one key.
+##    Actions will be bound in order given in configuration
+##    file. When a key is pressed, first action in order
+##    will test itself whether it's possible to run it. If
+##    test succeeds, action is executed and other actions
+##    bound to this key are ignored. If it doesn't, next
+##    action in order tests itself etc.
+##
+## 2) It's possible to bind more that one action at once
+##    to a key. It can be done using the following syntax:
+##
+##    def_key "key"
+##      action1
+##      action2
+##      ...
+##
+##    This creates a chain of actions. When such chain is
+##    executed, each action in chain is run until the end of
+##    chain is reached or one of its actions fails to execute
+##    due to its requirements not being met. If multiple actions
+##    and/or chains are bound to the same key, they will be
+##    consecutively run until one of them gets fully executed.
+##
+## 3) When ncmpcpp starts, bindings configuration file is
+##    parsed and then ncmpcpp provides "missing pieces"
+##    of default keybindings. If you want to disable some
+##    bindings, there is a special action called 'dummy'
+##    for that purpose. Eg. if you want to disable ability
+##    to crop playlists, you need to put the following
+##    into configuration file:
+##
+##    def_key "C"
+##      dummy
+##
+##    After that ncmpcpp will not bind any default action
+##    to this key.
+##
+## 4) To let you write simple macros, the following special
+##    actions are provided:
+##
+##    - push_character "character" - pushes given special
+##      character into input queue, so it will be immediately
+##      picked by ncmpcpp upon next call to readKey function.
+##      Accepted values: mouse, up, down, page_up, page_down,
+##      home, end, space, enter, insert, delete, left, right,
+##      tab, ctrl-a, ctrl-b, ..., ctrl-z, ctrl-[, ctrl-\\,
+##      ctrl-], ctrl-^, ctrl-_, f1, f2, ..., f12, backspace.
+##      In addition, most of these names can be prefixed with
+##      alt-/ctrl-/shift- to be recognized with the appropriate
+##      modifier key(s).
+##
+##    - push_characters "string" - pushes given string into
+##      input queue.
+##
+##    - require_runnable "action" - checks whether given action
+##      is runnable and fails if it isn't. This is especially
+##      useful when mixed with previous two functions. Consider
+##      the following macro definition:
+##
+##      def_key "key"
+##        push_characters "custom_filter"
+##        apply_filter
+##
+##      If apply_filter can't be currently run, we end up with
+##      sequence of characters in input queue which will be
+##      treated just as we typed them. This may lead to unexpected
+##      results (in this case 'c' will most likely clear current
+##      playlist, 'u' will trigger database update, 's' will stop
+##      playback etc.). To prevent such thing from happening, we
+##      need to change above definition to this one:
+##
+##      def_key "key"
+##        require_runnable "apply_filter"
+##        push_characters "custom_filter"
+##        apply_filter
+##
+##      Here, first we test whether apply_filter can be actually run
+##      before we stuff characters into input queue, so if condition
+##      is not met, whole chain is aborted and we're fine.
+##
+##    - require_screen "screen" - checks whether given screen is
+##      currently active. accepted values: browser, clock, help,
+##      media_library, outputs, playlist, playlist_editor,
+##      search_engine, tag_editor, visualizer, last_fm, lyrics,
+##      selected_items_adder, server_info, song_info,
+##      sort_playlist_dialog, tiny_tag_editor.
+##
+##    - run_external_command "command" - runs given command using
+##      system() function.
+##
+## 5) In addition to binding to a key, you can also bind actions
+##    or chains of actions to a command. If it comes to commands,
+##    syntax is very similar to defining keys. Here goes example
+##    definition of a command:
+##
+##      def_command "quit" [deferred]
+##        stop
+##        quit
+##
+##    If you execute the above command (which can be done by
+##    invoking action execute_command, typing 'quit' and pressing
+##    enter), ncmpcpp will stop the player and then quit. Note the
+##    presence of word 'deferred' enclosed in square brackets. It
+##    tells ncmpcpp to wait for confirmation (ie. pressing enter)
+##    after you typed quit. Instead of 'deferred', 'immediate'
+##    could be used. Then ncmpcpp will not wait for confirmation
+##    (enter) and will execute the command the moment it sees it.
+##
+##    Note: while command chains are executed, internal environment
+##    update (which includes current window refresh and mpd status
+##    update) is not performed for performance reasons. However, it
+##    may be desirable to do so in some situration. Therefore it's
+##    possible to invoke by hand by performing 'update enviroment'
+##    action.
+##
+## Note: There is a difference between:
+##
+##         def_key "key"
+##           action1
+##
+##         def_key "key"
+##           action2
+##
+##       and
+##
+##         def_key "key"
+##           action1
+##           action2
+##
+##      First one binds two single actions to the same key whilst
+##      second one defines a chain of actions. The behavior of
+##      these two is different and is described in (1) and (2).
+##
+## Note: Function def_key accepts non-ascii characters.
+##
+##### List of unbound actions #####
+##
+## The following actions are not bound to any key/command:
+##
+##  - set_volume
+##
+#
+#def_key "mouse"
+#  mouse_event
+#
+def_key "k"
+  scroll_up
+
+def_key "K"
+  select_item
+  scroll_up
+
+def_key "j"
+  scroll_down
+
+def_key "J"
+  select_item
+  scroll_down
+
+def_key "["
+  scroll_up_album
+
+def_key "]"
+  scroll_down_album
+
+def_key "{"
+  scroll_up_artist
+
+def_key "}"
+  scroll_down_artist
+
+#def_key "page_up"
+#  page_up
+#
+#def_key "page_down"
+#  page_down
+#
+#def_key "home"
+#  move_home
+#
+#def_key "end"
+#  move_end
+#
+#def_key "insert"
+#  select_item
+#
+#def_key "enter"
+#  enter_directory
+#
+#def_key "enter"
+#  toggle_output
+#
+#def_key "enter"
+#  run_action
+#
+#def_key "enter"
+#  play_item
+#
+#def_key "space"
+#  add_item_to_playlist
+#
+#def_key "space"
+#  toggle_lyrics_update_on_song_change
+#
+#def_key "space"
+#  toggle_visualization_type
+#
+#def_key "delete"
+#  delete_playlist_items
+#
+#def_key "delete"
+#  delete_browser_items
+#
+#def_key "delete"
+#  delete_stored_playlist
+
+def_key "l"
+  next_column
+
+def_key "l"
+  slave_screen
+
+#def_key "right"
+#  volume_up
+#
+#def_key "+"
+#  volume_up
+
+def_key "h"
+  previous_column
+
+def_key "h"
+  master_screen
+
+#def_key "left"
+#  volume_down
+#
+#def_key "-"
+#  volume_down
+#
+#def_key ":"
+#  execute_command
+#
+#def_key "tab"
+#  next_screen
+#
+#def_key "shift-tab"
+#  previous_screen
+#
+#def_key "f1"
+#  show_help
+#
+#def_key "1"
+#  show_playlist
+#
+#def_key "2"
+#  show_browser
+#
+#def_key "2"
+#  change_browse_mode
+#
+#def_key "3"
+#  show_search_engine
+#
+#def_key "3"
+#  reset_search_engine
+#
+#def_key "4"
+#  show_media_library
+#
+#def_key "4"
+#  toggle_media_library_columns_mode
+#
+#def_key "5"
+#  show_playlist_editor
+#
+#def_key "6"
+#  show_tag_editor
+#
+#def_key "7"
+#  show_outputs
+#
+#def_key "8"
+#  show_visualizer
+#
+#def_key "="
+#  show_clock
+#
+#def_key "@"
+#  show_server_info
+#
+#def_key "s"
+#  stop
+#
+#def_key "p"
+#  pause
+#
+#def_key ">"
+#  next
+#
+#def_key "<"
+#  previous
+#
+#def_key "ctrl-h"
+#  jump_to_parent_directory
+#
+#def_key "ctrl-h"
+#  replay_song
+#
+#def_key "backspace"
+#  jump_to_parent_directory
+#
+#def_key "backspace"
+#  replay_song
+#
+#def_key "f"
+#  seek_forward
+#
+#def_key "b"
+#  seek_backward
+#
+#def_key "r"
+#  toggle_repeat
+#
+#def_key "z"
+#  toggle_random
+#
+#def_key "y"
+#  save_tag_changes
+#
+#def_key "y"
+#  start_searching
+#
+#def_key "y"
+#  toggle_single
+#
+#def_key "R"
+#  toggle_consume
+#
+#def_key "Y"
+#  toggle_replay_gain_mode
+#
+#def_key "T"
+#  toggle_add_mode
+#
+#def_key "|"
+#  toggle_mouse
+#
+#def_key "#"
+#  toggle_bitrate_visibility
+#
+#def_key "Z"
+#  shuffle
+#
+#def_key "x"
+#  toggle_crossfade
+#
+#def_key "X"
+#  set_crossfade
+#
+#def_key "u"
+#  update_database
+#
+#def_key "ctrl-s"
+#  sort_playlist
+#
+#def_key "ctrl-s"
+#  toggle_browser_sort_mode
+#
+#def_key "ctrl-s"
+#  toggle_media_library_sort_mode
+#
+#def_key "ctrl-r"
+#  reverse_playlist
+#
+#def_key "ctrl-f"
+#  apply_filter
+#
+#def_key "ctrl-_"
+#  select_found_items
+#
+#def_key "/"
+#  find
+#
+#def_key "/"
+#  find_item_forward
+#
+#def_key "?"
+#  find
+#
+#def_key "?"
+#  find_item_backward
+#
+#def_key "."
+#  next_found_item
+#
+#def_key ","
+#  previous_found_item
+#
+#def_key "w"
+#  toggle_find_mode
+#
+#def_key "e"
+#  edit_song
+#
+#def_key "e"
+#  edit_library_tag
+#
+#def_key "e"
+#  edit_library_album
+#
+#def_key "e"
+#  edit_directory_name
+#
+#def_key "e"
+#  edit_playlist_name
+#
+#def_key "e"
+#  edit_lyrics
+#
+#def_key "i"
+#  show_song_info
+#
+#def_key "I"
+#  show_artist_info
+#
+#def_key "g"
+#  jump_to_position_in_song
+#
+#def_key "l"
+#  show_lyrics
+#
+#def_key "ctrl-v"
+#  select_range
+#
+#def_key "v"
+#  reverse_selection
+#
+#def_key "V"
+#  remove_selection
+#
+#def_key "B"
+#  select_album
+#
+#def_key "a"
+#  add_selected_items
+#
+#def_key "c"
+#  clear_playlist
+#
+#def_key "c"
+#  clear_main_playlist
+#
+#def_key "C"
+#  crop_playlist
+#
+#def_key "C"
+#  crop_main_playlist
+#
+#def_key "m"
+#  move_sort_order_up
+#
+#def_key "m"
+#  move_selected_items_up
+#
+#def_key "n"
+#  move_sort_order_down
+#
+#def_key "n"
+#  move_selected_items_down
+#
+#def_key "M"
+#  move_selected_items_to
+#
+#def_key "A"
+#  add
+#
+#def_key "S"
+#  save_playlist
+#
+#def_key "o"
+#  jump_to_playing_song
+#
+#def_key "G"
+#  jump_to_browser
+#
+#def_key "G"
+#  jump_to_playlist_editor
+#
+#def_key "~"
+#  jump_to_media_library
+#
+#def_key "E"
+#  jump_to_tag_editor
+#
+#def_key "U"
+#  toggle_playing_song_centering
+#
+#def_key "P"
+#  toggle_display_mode
+#
+#def_key "\\"
+#  toggle_interface
+#
+#def_key "!"
+#  toggle_separators_between_albums
+#
+#def_key "L"
+#  toggle_lyrics_fetcher
+#
+#def_key "F"
+#  fetch_lyrics_in_background
+#
+#def_key "alt-l"
+#  toggle_fetching_lyrics_in_background
+#
+#def_key "ctrl-l"
+#  toggle_screen_lock
+#
+#def_key "`"
+#  toggle_library_tag_type
+#
+#def_key "`"
+#  refetch_lyrics
+#
+#def_key "`"
+#  add_random_items
+#
+#def_key "ctrl-p"
+#  set_selected_items_priority
+#
+#def_key "q"
+#  quit
+#
diff --git a/ncmpcpp/config b/ncmpcpp/config
new file mode 100644
index 0000000..2b4b68f
--- /dev/null
+++ b/ncmpcpp/config
@@ -0,0 +1,544 @@
+##############################################################################
+## This is the example configuration file. Copy it to $HOME/.ncmpcpp/config ##
+## or $XDG_CONFIG_HOME/ncmpcpp/config and set up your preferences.          ##
+##############################################################################
+#
+##### directories ######
+##
+## Directory for storing ncmpcpp related files.  Changing it is useful if you
+## want to store everything somewhere else and provide command line setting for
+## alternative location to config file which defines that while launching
+## ncmpcpp.
+##
+#
+ncmpcpp_directory = ~/.config/ncmpcpp
+#
+##
+## Directory for storing downloaded lyrics. It defaults to ~/.lyrics since other
+## MPD clients (eg. ncmpc) also use that location.
+##
+#
+lyrics_directory = ~/.config/ncmpcpp/lyrics
+#
+##### connection settings #####
+#
+mpd_host = ~/.config/mpd/socket
+#
+#mpd_port = 6600
+#
+#mpd_connection_timeout = 5
+#
+## Needed for tag editor and file operations to work.
+##
+#mpd_music_dir = ~/music
+#
+#mpd_crossfade_time = 5
+#
+##### music visualizer #####
+##
+## Note: In order to make music visualizer work you'll need to use mpd fifo
+## output, whose format parameter has to be set to 44100:16:1 for mono
+## visualization or 44100:16:2 for stereo visualization. Example configuration
+## (it has to be put into mpd.conf):
+##
+audio_output {
+       type            "fifo"
+       name            "Visualizer feed"
+       path            "/tmp/mpd.fifo"
+       format          "44100:16:2"
+}
+##
+#
+visualizer_data_source = /tmp/mpd.fifo
+#
+##
+## Note: Below parameter is needed for ncmpcpp to determine which output
+## provides data for visualizer and thus allow syncing between visualization and
+## sound as currently there are some problems with it.
+##
+#
+visualizer_output_name = my_fifo
+#
+##
+## If you set format to 44100:16:2, make it 'yes'.
+##
+#visualizer_in_stereo = yes
+#
+##
+## Note: Below parameter defines how often ncmpcpp has to "synchronize"
+## visualizer and audio outputs.  30 seconds is optimal value, but if you
+## experience synchronization problems, set it to lower value.  Keep in mind
+## that sane values start with >=10.
+##
+#
+#visualizer_sync_interval = 30
+#
+##
+## Note: To enable spectrum frequency visualization you need to compile ncmpcpp
+## with fftw3 support.
+##
+#
+## Available values: spectrum, wave, wave_filled, ellipse.
+##
+visualizer_type = spectrum
+#
+visualizer_look = ●▮
+#
+#visualizer_color = blue, cyan, green, yellow, magenta, red
+#
+## Alternative subset of 256 colors for terminals that support it.
+##
+#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
+#
+##### system encoding #####
+##
+## ncmpcpp should detect your charset encoding but if it failed to do so, you
+## can specify charset encoding you are using here.
+##
+## Note: You can see whether your ncmpcpp build supports charset detection by
+## checking output of `ncmpcpp --version`.
+##
+## Note: Since MPD uses UTF-8 by default, setting this option makes sense only
+## if your encoding is different.
+##
+#
+#system_encoding = ""
+#
+##### delays #####
+#
+## Time of inactivity (in seconds) after playlist highlighting will be disabled
+## (0 = always on).
+##
+#playlist_disable_highlight_delay = 5
+#
+## Defines how long messages are supposed to be visible.
+##
+#message_delay_time = 5
+#
+##### song format #####
+##
+## For a song format you can use:
+##
+## %l - length
+## %f - filename
+## %D - directory
+## %a - artist
+## %A - album artist
+## %t - title
+## %b - album
+## %y - date
+## %n - track number (01/12 -> 01)
+## %N - full track info (01/12 -> 01/12)
+## %g - genre
+## %c - composer
+## %p - performer
+## %d - disc
+## %C - comment
+## %P - priority
+## $R - begin right alignment
+##
+## If you want to make sure that a part of the format is displayed only when
+## certain tags are present, you can archieve it by grouping them with brackets,
+## e.g. '{%a - %t}' will be evaluated to 'ARTIST - TITLE' if both tags are
+## present or '' otherwise.  It is also possible to define a list of
+## alternatives by providing several groups and separating them with '|',
+## e.g. '{%t}|{%f}' will be evaluated to 'TITLE' or 'FILENAME' if the former is
+## not present.
+##
+## Note: If you want to set limit on maximal length of a tag, just put the
+## appropriate number between % and character that defines tag type, e.g. to
+## make album take max. 20 terminal cells, use '%20b'.
+##
+## In addition, formats support markers used for text attributes.  They are
+## followed by character '$'. After that you can put:
+##
+## - 0 - default window color (discards all other colors)
+## - 1 - black
+## - 2 - red
+## - 3 - green
+## - 4 - yellow
+## - 5 - blue
+## - 6 - magenta
+## - 7 - cyan
+## - 8 - white
+## - 9 - end of current color
+## - b - bold text
+## - u - underline text
+## - r - reverse colors
+## - a - use alternative character set
+##
+## If you don't want to use a non-color attribute anymore, just put it again,
+## but this time insert character '/' between '$' and attribute character,
+## e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename with
+## reversed colors.
+##
+## If you want to use 256 colors and/or background colors in formats (the naming
+## scheme is described below in section about color definitions), it can be done
+## with the syntax $(COLOR), e.g. to set the artist tag to one of the
+## non-standard colors and make it have yellow background, you need to write
+## $(197_yellow)%a$(end). Note that for standard colors this is interchangable
+## with attributes listed above.
+##
+## Note: colors can be nested.
+##
+#
+#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
+#
+#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
+#
+#song_library_format = {%n - }{%t}|{%f}
+#
+#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
+#
+#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
+#
+#current_item_prefix = $(yellow)$r
+#
+#current_item_suffix = $/r$(end)
+#
+#current_item_inactive_column_prefix = $(white)$r
+#
+#current_item_inactive_column_suffix = $/r$(end)
+#
+#now_playing_prefix = $b
+#
+#now_playing_suffix = $/b
+#
+#browser_playlist_prefix = "$2playlist$9 "
+#
+#selected_item_prefix = $6
+#
+#selected_item_suffix = $9
+#
+#modified_item_prefix = $3> $9
+#
+##
+## Note: attributes are not supported for the following variables.
+##
+#song_window_title_format = {%a - }{%t}|{%f}
+##
+## Note: Below variables are used for sorting songs in browser.  The sort mode
+## determines how songs are sorted, and can be used in combination with a sort
+## format to specify a custom sorting format.  Available values for
+## browser_sort_mode are "name", "mtime", "format" and "noop".
+##
+#
+#browser_sort_mode = name
+#
+#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
+#
+##### columns settings #####
+##
+## syntax of song columns list format is "column column etc."
+##
+## - syntax for each column is:
+##
+## (width of the column)[color of the column]{displayed tag}
+##
+## Note: Width is by default in %, if you want a column to have fixed size, add
+## 'f' after the value, e.g. (10)[white]{a} will be the column that take 10% of
+## screen (so the real width will depend on actual screen size), whereas
+## (10f)[white]{a} will take 10 terminal cells, no matter how wide the screen
+## is.
+##
+## - color is optional (if you want the default one, leave the field empty).
+##
+## Note: You can give a column additional attributes by putting appropriate
+## character after displayed tag character. Available attributes are:
+##
+## - r - column will be right aligned
+## - E - if tag is empty, empty tag marker won't be displayed
+##
+## You can also:
+##
+## - give a column custom name by putting it after attributes, separated with
+##   character ':', e.g. {lr:Length} gives you right aligned column of lengths
+##   named "Length".
+##
+## - define sequence of tags, that have to be displayed in case predecessor is
+##   empty in a way similar to the one in classic song format, i.e. using '|'
+##   character, e.g. {a|c|p:Owner} creates column named "Owner" that tries to
+##   display artist tag and then composer and performer if previous ones are not
+##   available.
+##
+#
+#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
+#
+##### various settings #####
+#
+##
+## Note: Custom command that will be executed each time song changes. Useful for
+## notifications etc.
+##
+#execute_on_song_change = ""
+#
+##
+## Note: Custom command that will be executed each time player state
+## changes. The environment variable MPD_PLAYER_STATE is set to the current
+## state (either unknown, play, pause, or stop) for its duration.
+##
+#
+#execute_on_player_state_change = ""
+#
+#playlist_show_mpd_host = no
+#
+#playlist_show_remaining_time = no
+#
+#playlist_shorten_total_times = no
+#
+#playlist_separate_albums = no
+#
+##
+## Note: Possible display modes: classic, columns.
+##
+#playlist_display_mode = columns
+#
+#browser_display_mode = classic
+#
+#search_engine_display_mode = classic
+#
+#playlist_editor_display_mode = classic
+#
+#discard_colors_if_item_is_selected = yes
+#
+#show_duplicate_tags = yes
+#
+#incremental_seeking = yes
+#
+#seek_time = 1
+#
+#volume_change_step = 2
+#
+#autocenter_mode = no
+#
+#centered_cursor = no
+#
+##
+## Note: You can specify third character which will be used to build 'empty'
+## part of progressbar.
+##
+#progressbar_look = =>
+#
+## Available values: database, playlist.
+##
+#default_place_to_search_in = database
+#
+## Available values: classic, alternative.
+##
+#user_interface = classic
+#
+#data_fetching_delay = yes
+#
+## Available values: artist, album_artist, date, genre, composer, performer.
+##
+#media_library_primary_tag = artist
+#
+#media_library_albums_split_by_date = yes
+#
+## Available values: wrapped, normal.
+##
+#default_find_mode = wrapped
+#
+#default_tag_editor_pattern = %n - %t
+#
+#header_visibility = yes
+#
+#statusbar_visibility = yes
+#
+#titles_visibility = yes
+#
+#header_text_scrolling = yes
+#
+#cyclic_scrolling = no
+#
+#lines_scrolled = 2
+#
+#lyrics_fetchers = lyricwiki, azlyrics, genius, sing365, lyricsmania, metrolyrics, justsomelyrics, jahlyrics, plyrics, tekstowo, internet
+#
+#follow_now_playing_lyrics = no
+#
+#fetch_lyrics_for_current_song_in_background = no
+#
+#store_lyrics_in_song_dir = no
+#
+#generate_win32_compatible_filenames = yes
+#
+#allow_for_physical_item_deletion = no
+#
+##
+## Note: If you set this variable, ncmpcpp will try to get info from last.fm in
+## language you set and if it fails, it will fall back to english. Otherwise it
+## will use english the first time.
+##
+## Note: Language has to be expressed as an ISO 639 alpha-2 code.
+##
+#lastfm_preferred_language = en
+#
+#space_add_mode = add_remove
+#
+#show_hidden_files_in_local_browser = no
+#
+##
+## How shall screen switcher work?
+##
+## - "previous" - switch between the current and previous screen.
+## - "screen1,...,screenN" - switch between given sequence of screens.
+##
+## Screens available for use: help, playlist, browser, search_engine,
+## media_library, playlist_editor, tag_editor, outputs, visualizer, clock,
+## lyrics, last_fm.
+##
+#screen_switcher_mode = playlist, browser
+#
+##
+## Note: You can define startup screen by choosing screen from the list above.
+##
+#startup_screen = playlist
+#
+##
+## Note: You can define startup slave screen by choosing screen from the list
+## above or an empty value for no slave screen.
+##
+#startup_slave_screen = ""
+#
+#startup_slave_screen_focus = no
+#
+##
+## Default width of locked screen (in %).  Acceptable values are from 20 to 80.
+##
+#
+#locked_screen_width_part = 50
+#
+#ask_for_locked_screen_width_part = yes
+#
+#jump_to_now_playing_song_at_start = yes
+#
+#ask_before_clearing_playlists = yes
+#
+#clock_display_seconds = no
+#
+#display_volume_level = yes
+#
+#display_bitrate = no
+#
+#display_remaining_time = no
+#
+## Available values: none, basic, extended, perl.
+##
+#regular_expressions = perl
+#
+##
+## Note: if below is enabled, ncmpcpp will ignore leading "The" word while
+## sorting items in browser, tags in media library, etc.
+##
+#ignore_leading_the = no
+#
+##
+## Note: if below is enabled, ncmpcpp will ignore diacritics while searching and
+## filtering lists. This takes an effect only if boost was compiled with ICU
+## support.
+##
+#ignore_diacritics = no
+#
+#block_search_constraints_change_if_items_found = yes
+#
+#mouse_support = yes
+#
+#mouse_list_scroll_whole_page = yes
+#
+#empty_tag_marker = <empty>
+#
+#tags_separator = " | "
+#
+#tag_editor_extended_numeration = no
+#
+#media_library_sort_by_mtime = no
+#
+#enable_window_title = yes
+#
+##
+## Note: You can choose default search mode for search engine. Available modes
+## are:
+##
+## - 1 - use mpd built-in searching (no regexes, pattern matching)
+##
+## - 2 - use ncmpcpp searching (pattern matching with support for regexes, but
+##       if your mpd is on a remote machine, downloading big database to process
+##       it can take a while
+##
+## - 3 - match only exact values (this mode uses mpd function for searching in
+##       database and local one for searching in current playlist)
+##
+#
+#search_engine_default_search_mode = 1
+#
+#external_editor = nano
+#
+## Note: set to yes if external editor is a console application.
+##
+#use_console_editor = yes
+#
+##### colors definitions #####
+##
+## It is possible to set a background color by setting a color value
+## "<foreground>_<background>", e.g. red_black will set foregound color to red
+## and background color to black.
+##
+## In addition, for terminals that support 256 colors it is possible to set one
+## of them by using a number in range [1, 256] instead of color name,
+## e.g. numerical value corresponding to red_black is 2_1. To find out if the
+## terminal supports 256 colors, run ncmpcpp and check out the bottom of the
+## help screen for list of available colors and their numerical values.
+##
+## What is more, there are two special values for the background color:
+## "transparent" and "current". The first one explicitly sets the background to
+## be transparent, while the second one allows you to preserve current
+## background color and change only the foreground one. It's used implicitly
+## when background color is not specified.
+##
+## Moreover, it is possible to attach format information to selected color
+## variables by appending to their end a colon followed by one or more format
+## flags, e.g. black:b or red:ur. The following variables support this syntax:
+## visualizer_color, color1, color2, empty_tag_color, volume_color,
+## state_line_color, state_flags_color, progressbar_color,
+## progressbar_elapsed_color, player_state_color, statusbar_time_color,
+## alternative_ui_separator_color.
+##
+## Note: due to technical limitations of older ncurses version, if 256 colors
+## are used there is a possibility that you'll be able to use only colors with
+## transparent background.
+#
+#colors_enabled = yes
+#
+#empty_tag_color = cyan
+#
+#header_window_color = default
+#
+#volume_color = default
+#
+#state_line_color = default
+#
+#state_flags_color = default:b
+#
+#main_window_color = yellow
+#
+#color1 = white
+#
+#color2 = green
+#
+#progressbar_color = black:b
+#
+#progressbar_elapsed_color = green:b
+#
+#statusbar_color = default
+#
+#statusbar_time_color = default:b
+#
+#player_state_color = default:b
+#
+#alternative_ui_separator_color = black:b
+#
+#window_border_color = green
+#
+#active_window_border = red
+#
diff --git a/ncmpcpp/patterns.list b/ncmpcpp/patterns.list
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/ncmpcpp/patterns.list